The production of density board begins with the processing of raw materials, which involves the separation of wood into fibers. A crucial step in this process is chipping, where loose wood is cut into chips that meet production specifications to facilitate optimal conditions for fiber separation. Following chipping, wood chips undergo preheating and cooking before mechanical fiber separation takes place. The quality of the hot grinding process significantly impacts the product quality of density boards, emphasizing the necessity to utilize advanced hot grinding machines in the production line. Southeast Wood Industry has introduced state-of-the-art Andretz and Simbelkomp hot grinding machines to ensure industry-leading fiber quality. The combination of hot ground fibers and sizing results in a moisture content of 40% to 50%. Proper drying is essential for subsequent processing stages, with drying temperatures carefully controlled at approximately 165℃ to prevent resin pre-curing and preserve mechanical properties such as static bending (MOR) and tensile strength (IB). During the paving process, dried fibers are stored in bins before being fed through a laying machine using vacuum air for rough molding. Subsequent processes involving sweep rollers and prepress equipment further shape the fibers into boards without causing damage. Hot pressing is a critical stage in density board manufacturing, exerting significant influence on both product quality and output volume. Under heat and pressure, water within the boards undergoes gasification, evaporation, density increase, adhesive redistribution, ultimately forming various binding forces between fibers that meet quality standards. In dry production processes for density boards, industrial wastewater generation is minimal - primarily consisting of cork water extruded by feed screws. Typically treated using anaerobic methods on general production lines following a specific flow chart: workshop wastewater -> initial sedimentation -> water collection sedimentation tank -> anaerobic tank -> air float tank -> SBR pool -> Clear pool -> fiber transition ->Drainage.
|
Modell Nr. |
FM-MDFX03 |
|
Zertifizierung |
CE, ISO |
|
Zustand |
Neu |
|
Name |
SPANPLATTEN-PRODUKTIONSLINIE |
|
Spanplattengröße |
4*8 fuß oder Angepasst |
|
Plattendicke |
10-30mm |
|
Spanplattenwerk |
100-300m3 / Pro Tag |
Produktbilder
Verpackung & Versand
Informationen zum Unternehmen
Warum uns wählen
(1) Über 30 Jahre Erfahrung in der Herstellung von Maschinen zur Herstellung von Holzplatten.
(2) 20 Jahre Exporterfahrung in über 30 Länder weltweit.
(3) Maßgeschneiderte Maschinen entsprechend dem tatsächlichen Produktionsbedarf jedes Kunden mit den besten Produktionslösungen.
(4) Freie Gestaltung der gesamten Fabrikproduktionsanlage mit wirtschaftlichem Investitionsbudget.
(5) Kontrolle des gesamten Prozesses von der Auftragserteilung über die Produktion, das Beladen der Container, den Kurierdienst für Zolldokumente, das Entladen der Container sowie die Installation und Fehlerbehebung der Maschinen.
(6) 2 Jahre Qualitätsgarantie und lebenslanger kostenloser Online-Kundendienst.
(7) Professionelles After-Sales-Team mit über 10 Jahren Erfahrung in der Installation und Fehlerbehebung im Ausland.
(8) Kostenlose Schulung und Einweisung der Arbeitnehmer in die Bedienung der Maschinen und in die Technologie zur Herstellung von Holzwerkstoffplatten.
Beliebte label: Baumwollstroh-MDF-Maschinen, China Baumwollstroh-MDF-Maschinen Hersteller, Lieferanten, Fabrik
